Automation · Yaskawa

Yaskawa gear motors for Sigma-7 servo motors

Yaskawa gear motors combine a Sigma-7 rotary servo motor with a matched, low-backlash inline planetary gearhead, installed and tested by Yaskawa. Industrisol supplies Yaskawa gear motors in India for high-torque, low-speed servo axes.

  • Four gearhead families matched to SGM7J, SGM7A, SGM7G and SGM7P motors
  • Five ratios from 3:1 to 50:1
  • Standard backlash of 5 arc-min
  • Supplied from Mumbai to customers across India
Yaskawa S7J servo gear motor

Why fit a gearhead to a servo motor

Servo motors are most efficient at high speed and modest torque. Many machine axes need the opposite: low speed with high torque, such as rotary index tables, lifting axes or heavy conveyors. A planetary gearhead multiplies torque by the gear ratio and reduces speed, and it also reduces the load inertia seen by the motor by the square of the ratio, which makes the axis easier to tune and more stable.

Yaskawa gear motors are supplied with the gearhead factory-fitted to the servo motor and tested together, so there is no risk of an incorrect adapter or coupling in the field. They are available in six gearhead sizes and five ratios across the Sigma-7 motor families.

Yaskawa gear motors: Sigma-7 families

All four families share the same core gearhead features; choose the family that matches your Sigma-7 motor.

Yaskawa S7J gear motor for SGM7J servo motors

Yaskawa S7J gear motor

Designed for SGM7J medium-inertia servo motors, a series known for responsiveness where precise load matching is needed. Suits low-capacity, precise motion at rated speeds up to 3000 rpm.

Matched motor SGM7J
Gear ratios 3:1, 5:1, 10:1, 25:1, 50:1
Backlash 5 arc-min standard
Gearing Helical-cut gears for low noise and vibration
Bearings Uncaged needle roller bearings for rigidity
Lubrication Maintenance-free grease, any mounting orientation
Torque rating Up to 2.39 N·m (21 in-lb)
Yaskawa S7A gear motor for SGM7A servo motors

Yaskawa S7A gear motor

Optimised for SGM7A low-inertia servo motors, the general-purpose workhorse of the Sigma-7 line, transferring their high power rate and torque to the load.

Matched motor SGM7A
Gear ratios 3:1, 5:1, 10:1, 25:1, 50:1
Backlash 5 arc-min standard
Gearing Helical-cut gears for low noise and vibration
Bearings Uncaged needle roller bearings for rigidity
Lubrication Maintenance-free grease, any mounting orientation
Yaskawa S7G gear motor for SGM7G servo motors

Yaskawa S7G gear motor

For larger automation axes using SGM7G servo motors. The gearheads keep the space-saving profile of the motor while delivering high torque, consistent positioning and fast response to speed changes.

Matched motor SGM7G
Gear ratios 3:1, 5:1, 10:1, 25:1, 50:1
Backlash 5 arc-min standard
Gearing Helical-cut gears for low noise and vibration
Bearings Uncaged needle roller bearings for rigidity
Lubrication Maintenance-free grease, any mounting orientation
Yaskawa S7P gear motor for SGM7P flat servo motors

Yaskawa S7P gear motor

Matched to SGM7P flat servo motors, which are about 25% shorter than standard motors, for machine designs where axial length is limited.

Matched motor SGM7P (short length)
Gear ratios 3:1, 5:1, 10:1, 25:1, 50:1
Backlash 5 arc-min standard
Gearing Helical-cut gears for low noise and vibration
Bearings Uncaged needle roller bearings for rigidity
Lubrication Maintenance-free grease, any mounting orientation

Choosing a gear ratio

A simple rule: ratio is roughly motor rated speed divided by the maximum speed the load needs. Check output torque and inertia ratio before finalising.

Ratio Output speed at 3000 rpm motor Typical use
3:1 About 1000 rpm Moderate torque boost, inertia matching
5:1 About 600 rpm Belt and pulley replacements, feeders
10:1 About 300 rpm Index tables, positioning axes
25:1 About 120 rpm Heavy loads, rotary tables
50:1 About 60 rpm High torque, slow axes

Details needed for a gear motor selection

Not sure about some details? Send what you have — we will ask the right follow-up questions.

  • Load torque and maximum output speed required
  • Load inertia or a description of the load
  • Positioning accuracy needed (backlash sensitivity)
  • Duty cycle and mounting orientation
  • Sigma-7 motor model if you already have one
  • Space limits, especially overall length
  • Quantity and delivery location

FAQ

Frequently asked questions

Still have a question? Call +91 90433 36700 or send an enquiry.

What is a Yaskawa gear motor?

It is a Yaskawa Sigma-7 servo motor supplied with a matched inline planetary gearhead, factory-installed and tested by Yaskawa. It gives a servo axis more torque at lower speed while keeping the precision and responsiveness of the servo system.

What does 5 arc-min backlash mean?

Backlash is the small free movement at the gearhead output when direction reverses. Five arc-minutes is one-twelfth of a degree. For most positioning axes this is precise enough; for very high-precision rotary tables, discuss your accuracy requirement with us before selecting.

Can I fit a Yaskawa gearhead to my existing servo motor?

Yaskawa gear motors are supplied as a matched, factory-assembled unit. If you already have Sigma-7 motors, share the model numbers and we will check the options, which may include a complete gear motor or a suitable third-party servo gearbox.

Do Yaskawa gearheads need regular lubrication?

No routine re-greasing is needed. They use a high-viscosity, anti-separation grease that stays in place in any mounting orientation and is intended to last the life of the unit. Periodic checks for noise, heat or leakage are still good practice.

How do I get a quotation for a Yaskawa gear motor?

Send torque, speed, ratio or motor details through Request a quote or call +91 90433 36700. We will confirm the gear motor and matching SERVOPACK and reply with current pricing.

Need more torque from your servo axis?

Share your load and speed and we will propose a Yaskawa gear motor with the right ratio.