Water-saving solutions
Water saving nozzles for taps in Mumbai and across India
Industrisol supplies brass water saving nozzles in Mumbai and across India. Screwed onto an existing tap, a water saving nozzle changes the flow into a mist, spray or shower pattern and cuts consumption from a typical 8 to 15 litres per minute to as little as 0.3 litres per minute.
- Mist, umbrella spray and shower flow patterns
- Flow rates from 300 ml to 4 litres per minute
- Chrome-plated brass for long service life
- Adapters for internal and external tap threads
Talk to our team
Need a price, alternative or spec check?
Share the model, quantity and application. We reply with suitable options and a quotation.
- Phone: +91 90433 36700
- Email: industrisol@industrisol.com
What is a water saving nozzle and how does it work?
A water saving nozzle is a small attachment that screws onto the thread at the mouth of a tap. It splits the water into many small streams, mixes air into the flow, or converts it into a different pattern such as mist or spray. The water feels plentiful on the hands, but far less of it leaves the tap.
A normal aerator does not restrict flow: its output rises with line pressure, so an ordinary tap delivers anywhere from 8 to 15 litres per minute. A water saving nozzle limits the flow to a set rate. Mist models turn low-pressure water into a fine mist so hands can be washed with a fraction of the water, and flow stays steady even when pressure varies.
Nozzles work on both pressurised piping (with a pressure booster pump) and gravity-fed systems from an overhead tank, which covers most buildings in India.
Water saving nozzle range
Choose by flow pattern and where the tap is used. Bulk and project quantities can be quoted.
TrueMist 300 mist water saving nozzle
Our lowest-flow mist nozzle for handwash basins in offices, malls and public washrooms.
| Flow pattern | Mist |
|---|---|
| Flow rate | About 300 ml per minute |
| Body | Brass, chrome plated |
TrueMist 500 mist water saving nozzle
Mist flow with a little more volume for general handwash use.
| Flow pattern | Mist |
|---|---|
| Flow rate | About 500 ml per minute |
| Body | Brass, chrome plated |
TrueMist Twister dual mode nozzle
Switches between mist and shower flow, so one tap serves both handwashing and rinsing.
| Flow pattern | Mist and shower (dual mode) |
|---|---|
| Body | Brass, chrome plated |
TrueMist Arc water saver for angled taps
Mist nozzle designed for taps with an angled head.
| Flow pattern | Mist |
|---|---|
| Flow rate | About 500 ml per minute |
TrueSpray 1 LPM tap spray nozzle
Umbrella (hollow cone) spray for handwash taps where users prefer a spray to a mist.
| Flow pattern | Umbrella spray |
|---|---|
| Flow rate | 1 LPM (2 LPM also available) |
True TapShower water saving nozzle
Shower-stream nozzle for basins and pantry taps that need more volume.
| Flow pattern | Shower |
|---|---|
| Flow rate | 2, 3 or 4 LPM |
TrueSpray kitchen water saving nozzle
Spray nozzle for kitchen and pantry sinks used for rinsing.
| Flow pattern | Spray |
|---|---|
| Use | Kitchen sink |
Tap nozzle coupler M20 x F24
Adapter to fit M24 nozzles on taps with a 20 mm thread. M18 and M28 versions are also available.
| Tap thread | F20 (also F18, F28) |
|---|---|
| Nozzle thread | M24 |
Flow patterns at a glance
| Pattern | Range | Flow rate | Best for |
|---|---|---|---|
| Mist | TrueMist 300 / 500, TrueMist Arc | About 0.3 to 0.5 LPM | Handwash basins in offices and public washrooms |
| Umbrella spray | TrueSpray | 1 or 2 LPM | Handwash where a spray feel is preferred |
| Shower | True TapShower | 2, 3 or 4 LPM | Basins and pantry taps |
| Dual mode | TrueMist Twister | Mist and shower | Taps used for handwash and rinsing |
Benefits of fitting water saving nozzles
- Saves water: some nozzles restrict flow to below 0.3 LPM, a large cut from an open tap.
- Filters debris: the screen traps small particles; nozzles can be removed and cleaned when scale builds up.
- Prevents splashing: dividing the stream and lowering the flow stops water splashing around the basin.
- Shapes the stream into an even, controlled flow.
- Improves perceived pressure on low-pressure lines, as pressure builds behind the nozzle.
- Saves energy spent on pumping, treating and heating water.
Brass nozzles last longer than plastic aerators. For lower-cost plastic options see our water saving tap aerators.
Thread sizes and fitting
Our standard nozzles have an M24 male (outer) thread. Adapter rings convert this to suit taps with a 22 mm external thread, and couplers are available for taps with F18, F20 and F28 threads. Check whether your tap has an internal or external thread and measure its diameter before ordering. For taps with no thread, a flow restrictor or replacing the tap is usually the better option. Where tap sizes are non-standard, a custom nozzle or adapter can be made to requirement.
What to send for a bulk or project quote
Not sure about some details? Send what you have — we will ask the right follow-up questions.
- Number of taps and where they are used (washroom, pantry, kitchen)
- Tap thread type (internal or external) and size, or a photo of the tap mouth
- Preferred flow pattern: mist, spray or shower
- Water supply: overhead tank (gravity) or pressure pump
- Delivery location and any branding or packing needs
Related water-saving products
How much water does a water saving nozzle save?
It depends on the model and how the tap was used before. An ordinary tap typically delivers 8 to 15 litres per minute. A mist nozzle limits that to about 0.3 to 0.5 litres per minute and a shower nozzle to 2 to 4 litres per minute, so savings on frequently used handwash taps are very large.
Will a water saving nozzle fit my tap?
Most taps with a threaded mouth can take a nozzle. Our nozzles have an M24 male thread, and adapters are available for 18, 20, 22 and 28 mm tap threads, both internal and external. Send a photo of your tap mouth and we will confirm the right adapter.
Do water saving nozzles work with low water pressure?
Yes. They work on gravity-fed supply from an overhead tank and on pumped systems. Mist nozzles are designed to turn low-pressure water into a usable mist. On very low pressure lines a shower or spray model may feel better than a mist model.
What is the difference between a water saving nozzle and an aerator?
A standard aerator mixes air into the stream but does not fix the flow, so output still rises with pressure. A water saving nozzle limits flow to a set rate or changes the pattern to mist or spray. Our nozzles are brass; most aerators are plastic and lower in cost.
How do I clean a water saving nozzle?
Unscrew the nozzle, rinse out the screen and soak it in a vinegar and water solution to dissolve scale. Use a soft brush rather than a pin to avoid damaging the outlet. In hard-water areas, clean nozzles every few months.
Cut water use at every tap
Tell us how many taps you have and how they are used, and we will recommend nozzles with a quotation.