Industrial automation · Panasonic

Panasonic encoders in India: compact rotary encoders for control panels

Panasonic encoders in this range are compact mechanical rotary encoders that turn a knob or actuator movement into pulse signals for an instrument, controller or appliance. Industrisol sources them in volume or as spares for OEMs and electronics makers in Mumbai and across India.

  • 7, 10, 18 and 20 mm body sizes
  • SMD and through-hole PCB mounting
  • IP67 water-resistant option
  • Detent and pulse options to match your design
Panasonic 18 mm square rotary encoder

Panel encoders vs motor feedback encoders

An encoder works much like a potentiometer, but instead of a continuous analog voltage it produces repeated pulses as the shaft turns. The controller counts these pulses to know how far and in which direction the knob has moved. Because rotation is endless, encoders suit menu navigation, volume, set point and jog inputs where a potentiometer’s end stops would get in the way.

The Panasonic encoders listed here are compact component-level encoders for PCBs and front panels. They are not the shaft encoders used for motor speed and position feedback on conveyors and machine axes. For those, see our industrial encoder brands or the incremental encoder range. Panasonic servo motors carry their own built-in high-resolution encoders; see Panasonic AC motors.

Panasonic encoder series we source

Panasonic 10 mm square SMD rotary encoder

Panasonic 10 mm square SMD encoder

A low-profile surface-mount encoder only 2.2 mm high, for designs with very little space. It supports automatic mounting, has a light 2 mN·m rotation torque and works over a wide temperature range.

Height 2.2 mm
Shaft hole Up to 4 mm
Rotation torque 2 mN·m
Rotation 360° endless, incremental
Operating temperature -40 to +85 °C
Applications AC temperature controls, operating units, computer peripherals
Panasonic 10 mm square GS rotary encoder

Panasonic 10 mm square GS encoder

A compact, thin encoder with a good rotational feel that can stand vertically on the PCB without extra brackets.

Body thickness 4 mm nominal
Mounting Vertical self-standing on PCB
Applications Mouse wheels, communications equipment, instrument inputs

Panasonic 7 mm square encoder

A smaller, lower-height encoder for portable equipment and instrument front panels, with defined detents and vertical self-standing PCB mounting.

Product height 7 mm
Rotation torque 5 mN·m
Pulses / detents 12 pulses, 24 detent positions
Mechanical life Up to 100,000 cycles
Rotation 360° endless
Panasonic 18 mm square water-resistant encoder

Panasonic 18 mm square encoder, IP67

A water-resistant encoder with a firm, responsive click and high precision from its insertion contact method. Suited to home appliances and AV equipment where moisture may reach the control.

Protection IP67
Rotation torque 50 mN·m
Output 3-bit, 8 positions
Mechanical life 30,000 cycles
Rotation 360° endless
Panasonic 20/12 mm centre space rotary encoder

Panasonic 20/12 mm centre-space encoder

A ring-shaped encoder with an open 12 mm centre, so a switch or LED can be mounted inside the knob on the same PCB. Widely used in car audio and AV equipment for volume, tone and tuning.

Outer / centre diameter 20 mm / 12 mm
Rotation torque 7, 11 or 18 mN·m
Pulses / detents 9 pulses, 18 detent positions
Mechanical life 30,000 cycles
LED Can be combined with an LED for indication

Comparing Panasonic encoders at a glance

Series Key strength Typical use
10 mm SMD Lowest profile, auto-mount Slim control panels
10 mm GS Thin, self-standing Peripherals, instruments
7 mm Small, 100k-cycle life Portable devices
18 mm IP67, firm click Appliances, AV
20/12 mm Open centre for switch or LED Car audio, AV

What to include in your encoder enquiry

Not sure about some details? Send what you have — we will ask the right follow-up questions.

  • Panasonic part number, or series and size
  • Detent count and pulses per revolution needed
  • Shaft type, length and knob fitting
  • Mounting: SMD, through-hole, vertical
  • Push switch or LED requirement
  • Annual or batch quantity

FAQ

Frequently asked questions

Still have a question? Call +91 90433 36700 or send an enquiry.

What is the difference between a rotary encoder and a potentiometer?

A potentiometer gives a continuous analog voltage over a limited turn, usually about 300 degrees. A rotary encoder gives digital pulses and turns endlessly, so the controller decides what each step means. Encoders suit menu navigation and digital set points; potentiometers suit simple analog adjustments without a microcontroller.

Can these Panasonic encoders be used for motor speed feedback?

No. These are low-speed mechanical encoders for hand-operated knobs, with a limited number of pulses and a rated mechanical life in cycles. Motor feedback needs optical or magnetic shaft encoders rated for continuous high speed. See our encoder brands page or incremental encoder range for those.

What does detent mean on a rotary encoder?

A detent is a click position you feel as you turn the knob. Detents help the user count steps. The ratio of pulses to detents matters for software: for example, the 7 mm series gives 12 pulses with 24 detents, so your firmware must handle a signal change at every click.

Do you supply encoders in production quantities?

Yes. Most component-level encoder enquiries are for production batches, though we also take spares requests. Send the exact Panasonic part number, quantity and schedule so the quotation reflects packaging such as tape-and-reel for SMD parts.

Need Panasonic encoders?

Share the part number or your size, detent and mounting needs for a quotation.