POLY FOAM PIGS

[vc_row][vc_column][vc_tta_tabs][vc_tta_section title=”Highlights” tab_id=”1609917432165-4e6f0ab3-3b1d”][vc_column_text]Poly Foam Pigs travel almost in all piping system.

Foam Pigs are available in a variety of abrasives and polyurethane patterns.

Foam pigs can be made in sizes varying between 1 inch to 120 inches.

Open cell foam enables Foam Pigs to move in 90° ells, tees, valves and reduction or expansion of diameter in pipelines.

Foam Pigs can be manufactured with double dish, double nose, pulling rope or cable, Transmitter fitting Provision, gauge plates and Jetting byepass ports.

Poly Pigs are coated with Polyurethane elastomers with shore A 80-85.[/vc_column_text][/vc_tta_section][vc_tta_section title=”Application” tab_id=”1609917432262-110b7da0-cb05″][cws_sc_text]

• Water & Waste Water
• Gathering
• Petro Chemical
• Air & Gas Injection
• Loading & Disposal
  Fuel
• Bitumen
• Oil

[/cws_sc_text][/vc_tta_section][vc_tta_section title=”Varieties” tab_id=”1609917566335-5db72750-3cb0″][cws_sc_text]Foam pigs are classified as four basic types:-

Scrapping

cleaning

Wiping

Drying

Poly Foam pigs are classified based on Polyurethane material:-

Low Density [1-2 lbs/ft),

Medium Density (5-8 lbs/ft)

Heavy Density (9-10 lbs/ft)[/cws_sc_text][/vc_tta_section][vc_tta_section title=”Gallery” tab_id=”1611135967908-af692cda-c993″][vc_column_text]

[ngg src=”galleries” ids=”1″ display=”basic_thumbnail” thumbnail_crop=”0″ number_of_columns=”5″ display_view=”default”][/vc_column_text][/vc_tta_section][/vc_tta_tabs][/vc_column][/vc_row][vc_row][vc_column][vc_toggle title=”Bare poly foam Pigs” open=”true”]Bare poly foam Pigs are made of Light density (1-2 lbs/ft³) ,Medium density (5-6 lbs/ft³),High Density (9-10 lbs/ft³).

Bare foam pigs are primarily used for drying and sweeping of loose debris.

This kind of Foam pigs are used in gentle cleaning, wiping and dewatering of the internal diameter of pipelines[/vc_toggle][vc_toggle title=”Criss Cross poly Foam pigs” open=”true”]

Criss Cross poly Foam pigs are made in criss cross pattern of polyurethane elastomers in the outer body.

Criss Cross Foam Pigs are majorily used for heavy cleaning and dewatering of the internal diameter of the pipeline.

These pigs can be done in different elastomer patterns: Single Cross or Criss Cross[/vc_toggle][vc_toggle title=”Light Wire Foam Pigs”]Light Wire Foam Pigs are pasted with wire brush on the Exterior Diameter.
Wire brushes are pasted using polyurethane elastomer for strong bonding.
Light Wire brushes are made up of nylon wire.
Nylon wire brushes enables gentle scrapping and scalling of medium density scales especially water lines.[/vc_toggle][vc_toggle title=”Fully Coated poly Foam pig” custom_use_theme_fonts=”yes”]Fully Coated poly Foam pig is fully coated with polyurethane elastomer, available in Light, Medium ang Heavy Density types.
Since, fully coated, this Foam pig can be used for long distance wiping, batching, product removal and dewatering of the internal diameter of pipelines.

Also provides excellent wear resistant in long runs.
Pigs are coated of Polyurethane elastomers with shore A 80-85.[/vc_toggle][vc_toggle title=”Abrasive Foam Pig”] 

Foam pigs are pasted with Silicon Carbide Strips on the body of pig.

Silicon Carbide Strips are pasted on the outer body using polyurethane elastomer to provide strong bonding.

Abrasive foam pigs are engineered for heavy scrapping of rust and cleaning application of buildup materials on the internal diameter of pipelines.

Abrasive powder (Silicon Carbide) can also be coated on the outer Diameter[/vc_toggle][vc_toggle title=”Heavy Wire poly Foam Pigs”]Heavy Wire poly Foam Pigs are pasted with metal wire brush on the Exterior Diameter.

Metal wire brush pig are well designed for the removal of hard scales on the internal diameter of the pipelines.[/vc_toggle][/vc_column][/vc_row]